Home > The current position > Exhibition Hall > Kaydon Thin-Section Ball Bearings KD040AR0 4.0000in*5.0000in
Kaydon Thin-Section Ball Bearings KD040AR0 4.0000in*5.0000in
Introduction
AISI 52100 steel with no seals or shields Standard cross section radial thickness 1/2" x width 1/2" KAYDON Precision Class 1 per ABEC 1F Angular Contact Bearing (Type A) The Type A Bearing is also a conventional design—features a circular pocket separator and a 30° contact angle along with approximately 67% of a full complement of balls The chief benefit of the Type A bearing is that it provides greater thrust capacity than a Type C or Type X bearing Because of its counterbored outer race, Type A bearings have unidirectional thrust capacity Thus, this bearing should be mounted opposed to another bearing to establish and maintain the contact angle, and to support reversing thrust loads
Kaydon Thin-Section Ball Bearings KD040AR0 4.0000in*5.0000in| Bore diameter: | 4.0000 in | Radial static load capacity: |
3550 lb |
|
| Outside diameter: | 5.0000 in | Bearing material: |
Steel |
|
| Overall width: | 0.5000 in | Precision rating: |
ABEC 1 (ISO Class Normal) |
|
| Bearing type: |
Angular Contact |
Ball retainer material: |
Brass |
|
| Closure type: |
Open |
Ball retainer type: |
Circular Pocket Separator |
|
| Internal clearance: |
C0 |
Axial static load capacity: |
10260 lb |
|
| Operating temperature range: |
-65 to +250 °F |
Fillet radius: |
0.06 in |
|
| Radial dynamic load capacity: |
1819 lb |
Standards met: |
AISI 52100 |
Kaydon Thin-Section Ball Bearings KD040AR0 4.0000in*5.0000in Model
CONTACT US
DESUN BEARING LIMITED
Add：ROOMS 1401-2,EASEY COMMERCIAL BUILDING,253-261 HENNESSY ROAD,WANCHAI,HONG KONG
Tel :
00852 30697280
Fax:
00852 30697280
E-Mail：Sales@desunbearing.com
